[?] [2344] AIMP Loading Tags from a Previous CD when New CD is Inserted

[syfrofyh]

Hi,
 
I'm using AIMP v5.00 build 2344 on Windows 10 pro (21h1)
However, the problem I'm having started when I was using an older version of AIMP 4.70 2236. I had uninstalled 4.70 and installed 5.00 hoping the problem would be fixed but it wasn't.

The issues is that when I insert a new CD AIMP is retaining/loading tags (e.g., artist, album, song name) from a previously used CD.

I checked Window Media player and that is properly loading the tags for the CD in the drive.

When I installed the new version of AIMP (v5.00), I tried things again with some different CDs but had the same problem:
After the fresh install, AIMP no longer had the tags that I had been stuck with when I was having the problem under v4.70. I inserted a first CD (not one previously used) and AIMP correctly loaded tags for that first CD that I put it. I ripped the CD to FLAC and then I edited the tags using the tag editor (to change the "disk" field to "1" because I'm ripping a 3 CD set). I ejected the CD and went to try the next one.
Then, the next CD that I put in was still loading the tags from that first CD.

I tried closing AIMP, re-inserting the disk, in AIMP clicking "reload tags".

Any thoughts on what's going on and how I might fix?
Any other info needed to help diagnose this problem?

Thanks!

[Artem]

I tried closing AIMP, re-inserting the disk, in AIMP clicking "reload tags".

And it does not help? AIMP caches data for CD using CDDB ID as a cache key. May these CDs has a same CDDB ID?

[syfrofyh]

No. I had the problem with AIMP using v4.70 and then when I reinstalled and used v5.00 I used different CDs.
Also, while AIMP was not loading the correct tags (i.e., with the disk still in the drive), I opened Windows media player and that loaded the correct tags (I wanted to make sure it wasn't a problem with the disk drive).