1
Звуковые эффекты / Sound Effects / Re: [DSP] VST host DSP
« on: December 02, 2023, 04:00:01 »
Not problem. The solution will appear
News: Планы на 2025
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: November 05, 2023, 01:53:05 »
AIMP 5.30 RC-2 fast test
Some changes in the host and in general of this RC-2 are noticeable, some plugins can already be used, some of those who already loaded them that make it faster.
We started with the novelty that the HPL Processor [Free] plugin in the previous versions appeared with an alert in the plugins section, and in the DSP/VST tab because it did not appear.
In this RC-2 version, we can already use it and it works well.
Tested with several plugins at the same time
Another problem that was in the previous versions was with TDR Nova [Free], which if you put a plugin before Nova, AIMP closed. In this RC-2 version no longer happens and can be used with several plugins before TDR Nova.
Some plugins that were tested in the previous versions were tested again in this version and it seems that there are no bad changes with them. So also new plugins were tested and works as expected.
Finally, there is a plugin that prevents the reproduction of the sound file when used, this is the same in all previous versions of AIMP 5.30, including the current one. This plugin is called 'Quilcom Peakakoo' [free], is a transient Shaper. You have a report of the error generated by AIMP
http://flowstoners.com/wp-content/uploads/2017/05/Quilcom-Peakyboo.zip
Some changes in the host and in general of this RC-2 are noticeable, some plugins can already be used, some of those who already loaded them that make it faster.
We started with the novelty that the HPL Processor [Free] plugin in the previous versions appeared with an alert in the plugins section, and in the DSP/VST tab because it did not appear.
In this RC-2 version, we can already use it and it works well.
Tested with several plugins at the same time
Another problem that was in the previous versions was with TDR Nova [Free], which if you put a plugin before Nova, AIMP closed. In this RC-2 version no longer happens and can be used with several plugins before TDR Nova.
Some plugins that were tested in the previous versions were tested again in this version and it seems that there are no bad changes with them. So also new plugins were tested and works as expected.
Finally, there is a plugin that prevents the reproduction of the sound file when used, this is the same in all previous versions of AIMP 5.30, including the current one. This plugin is called 'Quilcom Peakakoo' [free], is a transient Shaper. You have a report of the error generated by AIMP
http://flowstoners.com/wp-content/uploads/2017/05/Quilcom-Peakyboo.zip
I've fixed few major issues in my code.Great job, as always. Thank you
3
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 31, 2023, 22:24:38 »
Tests with AIMP 5.30.2526 RC
These tests are limited to VST plugins that have not worked well or do not work in the previous version of AIMP
We start with those who measure loudness.
** Youulean
We start with a small parenthesis, showing Youulean loaded in the VSThost for Winamo, where it works perfectly well, in a fluid and constant way using AIMP 5.11.
And now using the VSThost integrated in AIMP 5.30.2526 RC is working equally
x64 and x86
The other VST of measurement that showed problems similar to Youulean is that of TBAudio dpMeterXT, which now works in a fluid and constant way.
** dpMeterXT
x64
With audio 5.1, i chose the capture in the part where there is a pause on the LFE channel.
x86
With stereo audio and note how AIMP is sending 8 audio signals even if the sound file is stereo and shown in the dpMeterXT meter.
The measurements provided by these plugins using them from software for audio edition [Audacy 3.3.3 and Acon Nausica 7.4.14] were verified using the same audio files and the results in AIMP as in those programs they coincide.
On the Sonic Anomaly side were the problems with two of their creations, Hybrid Bus Compressor [HB2 and HB5] and NOVA2. In this new version of AIMP RC it already works correctly both. The soloson catches with HB5 that is focused on audio with 6 channels.
** HB5 with audio 5.1 in its versions x64 and x86 [respectively]
HB5 with stereo audio, it can be noted that the 8 AIMP channels are active, although the sound file is stereo. Capture only in version x64
** NOVA2
It is working as the changes in SPAN [upper entrance span, lower out span] are shown. Although the plugin waveform graph is not showing anything the change in the audio is heard according to the controls.
x64 and x86 [respectively]
NOVA2 showing its waveform graph from an audio editor, while the graph does not appear in AIMP although [by moments] traces of wanting to show themselves.
In summary:
- Measurement plugins already show normal operation and without affecting the reproduction of the audio files.
- On the Sonic Anomaly side also present the operation and results in the processing of the sound that is expected of them, although in the specific case of NOVA2 you do not have the sample of waveform drawn in its panel.
In all these cases, the plugins showed that they can be used with confidence in this version 5.30.2526 RC of AIMP.
These tests are limited to VST plugins that have not worked well or do not work in the previous version of AIMP
We start with those who measure loudness.
** Youulean
We start with a small parenthesis, showing Youulean loaded in the VSThost for Winamo, where it works perfectly well, in a fluid and constant way using AIMP 5.11.
And now using the VSThost integrated in AIMP 5.30.2526 RC is working equally
x64 and x86
The other VST of measurement that showed problems similar to Youulean is that of TBAudio dpMeterXT, which now works in a fluid and constant way.
** dpMeterXT
x64
With audio 5.1, i chose the capture in the part where there is a pause on the LFE channel.
x86
With stereo audio and note how AIMP is sending 8 audio signals even if the sound file is stereo and shown in the dpMeterXT meter.
The measurements provided by these plugins using them from software for audio edition [Audacy 3.3.3 and Acon Nausica 7.4.14] were verified using the same audio files and the results in AIMP as in those programs they coincide.
On the Sonic Anomaly side were the problems with two of their creations, Hybrid Bus Compressor [HB2 and HB5] and NOVA2. In this new version of AIMP RC it already works correctly both. The soloson catches with HB5 that is focused on audio with 6 channels.
** HB5 with audio 5.1 in its versions x64 and x86 [respectively]
HB5 with stereo audio, it can be noted that the 8 AIMP channels are active, although the sound file is stereo. Capture only in version x64
** NOVA2
It is working as the changes in SPAN [upper entrance span, lower out span] are shown. Although the plugin waveform graph is not showing anything the change in the audio is heard according to the controls.
x64 and x86 [respectively]
NOVA2 showing its waveform graph from an audio editor, while the graph does not appear in AIMP although [by moments] traces of wanting to show themselves.
In summary:
- Measurement plugins already show normal operation and without affecting the reproduction of the audio files.
- On the Sonic Anomaly side also present the operation and results in the processing of the sound that is expected of them, although in the specific case of NOVA2 you do not have the sample of waveform drawn in its panel.
In all these cases, the plugins showed that they can be used with confidence in this version 5.30.2526 RC of AIMP.
4
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 29, 2023, 04:53:13 »
TDR Nova [free] and TDR NOVA GE [demo]
A multiband equalizer for the master [the audio we use in AIMP], has the function only to listen only to the band that we are monitoring and being able to adjust that tone that interests us. The free version is restricted to only 4 bands and without the functions of automation and copy of presets, something that we will not strive.
x64
IMG] 22SEPT
x86
Using the function only to move from left to right the control point of that band to find where that tone that is to equalize.
Downmix 5.1 to stereo, because sometimes we want to have some more control over the mixture especially of the central channel and rear channels.
** LoRo [Left only, Right only], simple totally stereo mix
Nugen Halo Downmix [demo]
If we have an amplifier 5.1 in the monitor area we can change whether to listen .
x64
We show with dpMeter5 that 6 channels enter and only two channels come out.
x86
** LtRt [Lt = L+Ls+Center+LFE, Rt = R+Rs+Center+LFE], a special matrix that allows to rebuild the 6 channels of 5.1 from the stereo mixture
x86
Via La Matrix de Dolby Prologic-II [demo]
With dpMeter5 we see the signal of the 6 input channels, with another instance of dpMeter5 we see that after the DSP DPL-II we already have only two output signals.
**********************************
Blue Cat´s [aka BC], some plugins that will surely attract attention. The curious thing about this developer is that its plugins come in 3 versions when installing: the monkey, the dual and the stereo, the dual is that the L and R channel are handled independently, in addition to the fact that MID/SIDE can use, Unlike stereo where L and R channels are linked.
** BC tripleeq [free], a simple graphic equalizer with 3 control points, a circle to the center and two handlers [one at each end], we can drag those control points or be more precise with the controls
x64
The dual version of the plugin in MID/SIDE mode [m/s] or ms, blue color is mid and color is the side
x86
The Stereo version
** BC Re-Head [Demo], this is very good because it is exclusive for headphones. It allows to have a binural signal to give us the perception of depth and directionality of the sounds. Includes a graphic equalizer
x64
x86
** BC MB-7, this is my second favorite of this brand, allows us load more vst plugins; He is not the only one or the first who does it, but it is one of the most functional I have seen [and cheap]. The only one but I see him is that he only handles up to 2 audio channels.
MB-7 consists in being able to separate the audio signal from 1 or to 7 bands, in each band we can put up to 4 DSP [2 input and 2 output], both of the integrated DSPs or using other vst plugins that we have to The hand and fit more or what we want to do.
x64
Using span along with several of its integrated DSP
Showing the DSP load menu, showing several of the integrated DSPs
x86
BC MB-7 with Nugen Halo Dowmix [just to show since MB-7 Solo drives up to 2 audio channels]
With dpmeter5 and using 3 bands
The x64 version showing the 7 bands and the x86 version showing only 3
url=https://postimg.cc/N2tcB9CY]
[/url]
A multiband equalizer for the master [the audio we use in AIMP], has the function only to listen only to the band that we are monitoring and being able to adjust that tone that interests us. The free version is restricted to only 4 bands and without the functions of automation and copy of presets, something that we will not strive.
x64
IMG] 22SEPT
x86
Using the function only to move from left to right the control point of that band to find where that tone that is to equalize.
Downmix 5.1 to stereo, because sometimes we want to have some more control over the mixture especially of the central channel and rear channels.
** LoRo [Left only, Right only], simple totally stereo mix
Nugen Halo Downmix [demo]
If we have an amplifier 5.1 in the monitor area we can change whether to listen .
x64
We show with dpMeter5 that 6 channels enter and only two channels come out.
x86
** LtRt [Lt = L+Ls+Center+LFE, Rt = R+Rs+Center+LFE], a special matrix that allows to rebuild the 6 channels of 5.1 from the stereo mixture
x86
Via La Matrix de Dolby Prologic-II [demo]
With dpMeter5 we see the signal of the 6 input channels, with another instance of dpMeter5 we see that after the DSP DPL-II we already have only two output signals.
**********************************
Blue Cat´s [aka BC], some plugins that will surely attract attention. The curious thing about this developer is that its plugins come in 3 versions when installing: the monkey, the dual and the stereo, the dual is that the L and R channel are handled independently, in addition to the fact that MID/SIDE can use, Unlike stereo where L and R channels are linked.
** BC tripleeq [free], a simple graphic equalizer with 3 control points, a circle to the center and two handlers [one at each end], we can drag those control points or be more precise with the controls
x64
The dual version of the plugin in MID/SIDE mode [m/s] or ms, blue color is mid and color is the side
x86
The Stereo version
** BC Re-Head [Demo], this is very good because it is exclusive for headphones. It allows to have a binural signal to give us the perception of depth and directionality of the sounds. Includes a graphic equalizer
x64
x86
** BC MB-7, this is my second favorite of this brand, allows us load more vst plugins; He is not the only one or the first who does it, but it is one of the most functional I have seen [and cheap]. The only one but I see him is that he only handles up to 2 audio channels.
MB-7 consists in being able to separate the audio signal from 1 or to 7 bands, in each band we can put up to 4 DSP [2 input and 2 output], both of the integrated DSPs or using other vst plugins that we have to The hand and fit more or what we want to do.
x64
Using span along with several of its integrated DSP
Showing the DSP load menu, showing several of the integrated DSPs
x86
BC MB-7 with Nugen Halo Dowmix [just to show since MB-7 Solo drives up to 2 audio channels]
With dpmeter5 and using 3 bands
The x64 version showing the 7 bands and the x86 version showing only 3
url=https://postimg.cc/N2tcB9CY][/url]5
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 28, 2023, 04:17:08 »
TBPROAUDIO, with versions x86 and x64
** dpMeter5 [Free], we have a level meter of up to 6 channels, very useful for when the plugin we are using does not have its own meter.
It was tested both in stereo and audio audio 5.1
x64
x86
This works well both in its x86 and x64 versions without interfering with the quality of reproduction
Sleepy-Time, also has x86 and x64 versions of its plugins
** Transient [free], another DSP to add transitory and we can choose the frequency range where the changes will apply
x64
x86
Along with a compressor who can also be indicated by the frequency range on which he will act. Much the middle frequencies first decreasing the dynamic range with the compressor to increase it with transient transitories
Other x64 plugins
Signumaudio, Bute Bute Limiter 2 [demo], only exists in x64
Sonible
** Smart Limit [demo], another limiter but with AI that preloads the audio to analyze it and make a pre -adjustment that then we can modify by hand, so the VST is learning our tastes regarding the level of the audio. Works correctly allowing real -time work Only in version x64
** Pure Limit [demo], the younger brother of the previous one, also with AI works similar but we have little room to change by hand, but still learning from our tastes. Works correctly allowing real -time work
** Smart Comp 2 [demo], an equal compressor with AI, preloaded the audio, analyzes it, makes the prejustment and then learn from the manual changes that we make to its prejustment. Works correctly allowing real -time work
Other x86 plugins
** <> <e-D-G-E <> <[free] Another exciter with sub-channels that works exclusively on low frequencies, good for those regular speakers that are not very good with low frequencies
** Love and IKJB, other sub -Armonic plugins to make low frequencies more present and put an analog sensation of yesteryear
** dpMeter5 [Free], we have a level meter of up to 6 channels, very useful for when the plugin we are using does not have its own meter.
It was tested both in stereo and audio audio 5.1
x64
x86
This works well both in its x86 and x64 versions without interfering with the quality of reproduction
Sleepy-Time, also has x86 and x64 versions of its plugins
** Transient [free], another DSP to add transitory and we can choose the frequency range where the changes will apply
x64
x86
Along with a compressor who can also be indicated by the frequency range on which he will act. Much the middle frequencies first decreasing the dynamic range with the compressor to increase it with transient transitories
Other x64 plugins
Signumaudio, Bute Bute Limiter 2 [demo], only exists in x64
Sonible
** Smart Limit [demo], another limiter but with AI that preloads the audio to analyze it and make a pre -adjustment that then we can modify by hand, so the VST is learning our tastes regarding the level of the audio. Works correctly allowing real -time work Only in version x64
** Pure Limit [demo], the younger brother of the previous one, also with AI works similar but we have little room to change by hand, but still learning from our tastes. Works correctly allowing real -time work
** Smart Comp 2 [demo], an equal compressor with AI, preloaded the audio, analyzes it, makes the prejustment and then learn from the manual changes that we make to its prejustment. Works correctly allowing real -time work
Other x86 plugins
** <> <e-D-G-E <> <[free] Another exciter with sub-channels that works exclusively on low frequencies, good for those regular speakers that are not very good with low frequencies
** Love and IKJB, other sub -Armonic plugins to make low frequencies more present and put an analog sensation of yesteryear
6
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 28, 2023, 04:15:34 »
To conclude yesterday
Continuing the tests with AIMP 5.30.2526 x86 and x64 [32bit and 64bit]
When the plugin has both versions x86/x64 they are tested in both versions of AIMP, this because although in principle the plugins such as the host VST should behave, because it would not be the first time there are small differences that make a big difference of yield or software behavior [in this case of the player]. It should also be mentioned that as far as possible the most recent versions of the plugins were used; Almenos mostly. It is also mentioned that most of the plugins used are free, a few are demos [payment] versions.
Tests with several plugins were also carried out at the same time to show that the changes produced by each plugin go in chain, this is perceived via the resulting audio that is heard, but also to represent it and that it is noticed in the post are used plugins of measurement. Thus use some measurement plugins at the entrance [those placed in the highest part of the list] and until the output [the one placed in the lowest part of the list], also to notice the changes are made extreme adjustments in the Plugins options
The audio is mainly in stereo, although some movie clips are also used [Dolby 5.1] and some songs in Flac 5.1 for when multichannel plugins are tested.
We start with some Voxengo plugins; whatever it is, I love them and they were one of the first to use years ago, together with those of Blue Cat's that also surprise their so-called Tools [Patchwork, MB5 and MB-7 inre the highlights].
Voxengo
Voxengo Span and Span Plus for measuring and free analysis, while for the modification of the audio are MSED [MID/Side Editor], Varisaturador that simulates a valve amplifier to the empty plus some saturaration and transgrainer for saturation with transitory
** x64
SPAN [free] and presets menu, to show the changes between entry and exit. You can 'see' mono signs, stereo, mid/side, quadraphonics and 5.1/7.1. Span Plus [demo] is very similar and we will use it to monitor the entrance and see the original audio and span for the exit and see the modification.
MSED [free], much of the music is created in this stereo control system. It allows to manipulate of independent menera the MID signal [voices, low] and the SIDE signal [the stereo part]. The MID component is basically monaaural and is represented as a vertical bar, while the SIDE component shows the part of the audio stereo field and is manifested as a horizontal bar, when the two signs are the points we will have points filling the meter and so we will see how this distributed the audio.
Here showing that we have silenced the measured component and attenuated the SIDE component so it is only seen as a horizontal bar in MSED while in Span Plus on the left side the original signal is seen at the entrance and in Span of the right side it looks as a minor size.
Transgainer [demo], this temporary mete to the signal to increase sound, it is seen that the audio level between the entrance and the output [span plus left side and span right side respectively] increases]
Varisaturator [demo], putting some harmonic in low frequencies and high frequencies the audio level expanding them, [span plus left side the entrance and span right side the exit] and saturating the low frequencies.
We move on to the 32bit versions of Voxengo
** x86
Here we show that plugins can be moved, we pass Voxengo MSED X86 to a place below. We only hold and drag
With MSed Silence the MID component
Applying transitory with transgainer and harmonic with Varisaturador. Span Plus above for the entrance and Span below for the exit. Note how much we have changed the original signal. And we are already using 4 vst plugins
In conclusion with Voxengo both versions are worked [x86 and x64] equal to good with real -time results without any incidence.
Continuing the tests with AIMP 5.30.2526 x86 and x64 [32bit and 64bit]
When the plugin has both versions x86/x64 they are tested in both versions of AIMP, this because although in principle the plugins such as the host VST should behave, because it would not be the first time there are small differences that make a big difference of yield or software behavior [in this case of the player]. It should also be mentioned that as far as possible the most recent versions of the plugins were used; Almenos mostly. It is also mentioned that most of the plugins used are free, a few are demos [payment] versions.
Tests with several plugins were also carried out at the same time to show that the changes produced by each plugin go in chain, this is perceived via the resulting audio that is heard, but also to represent it and that it is noticed in the post are used plugins of measurement. Thus use some measurement plugins at the entrance [those placed in the highest part of the list] and until the output [the one placed in the lowest part of the list], also to notice the changes are made extreme adjustments in the Plugins options
The audio is mainly in stereo, although some movie clips are also used [Dolby 5.1] and some songs in Flac 5.1 for when multichannel plugins are tested.
We start with some Voxengo plugins; whatever it is, I love them and they were one of the first to use years ago, together with those of Blue Cat's that also surprise their so-called Tools [Patchwork, MB5 and MB-7 inre the highlights].
Voxengo
Voxengo Span and Span Plus for measuring and free analysis, while for the modification of the audio are MSED [MID/Side Editor], Varisaturador that simulates a valve amplifier to the empty plus some saturaration and transgrainer for saturation with transitory
** x64
SPAN [free] and presets menu, to show the changes between entry and exit. You can 'see' mono signs, stereo, mid/side, quadraphonics and 5.1/7.1. Span Plus [demo] is very similar and we will use it to monitor the entrance and see the original audio and span for the exit and see the modification.
MSED [free], much of the music is created in this stereo control system. It allows to manipulate of independent menera the MID signal [voices, low] and the SIDE signal [the stereo part]. The MID component is basically monaaural and is represented as a vertical bar, while the SIDE component shows the part of the audio stereo field and is manifested as a horizontal bar, when the two signs are the points we will have points filling the meter and so we will see how this distributed the audio.
Here showing that we have silenced the measured component and attenuated the SIDE component so it is only seen as a horizontal bar in MSED while in Span Plus on the left side the original signal is seen at the entrance and in Span of the right side it looks as a minor size.
Transgainer [demo], this temporary mete to the signal to increase sound, it is seen that the audio level between the entrance and the output [span plus left side and span right side respectively] increases]
Varisaturator [demo], putting some harmonic in low frequencies and high frequencies the audio level expanding them, [span plus left side the entrance and span right side the exit] and saturating the low frequencies.
We move on to the 32bit versions of Voxengo
** x86
Here we show that plugins can be moved, we pass Voxengo MSED X86 to a place below. We only hold and drag
With MSed Silence the MID component
Applying transitory with transgainer and harmonic with Varisaturador. Span Plus above for the entrance and Span below for the exit. Note how much we have changed the original signal. And we are already using 4 vst plugins
In conclusion with Voxengo both versions are worked [x86 and x64] equal to good with real -time results without any incidence.
7
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 27, 2023, 20:45:28 »
For nothing, although the truth first of all, thanks to you for giving you the time and effort to fulfill all users the little one - and very necessary - capricious of integrating the host vst in this - yet in itself magnificent - player. And I understand very well this time you dedicate, I proceed the tests I did a long time ago but I did not have the time to make the post until just and do it very fast, and that is just uploading the images and writing. That is why I reiterate the thanks of the time you dedicate
That said, yes, I hoped that Youlean was one of the plugins that will work at the first, since I have also used it in the Winamp Vsthost plugin with AIMP 5.11, but for that there are the tests to gradually polish the Host capacity.
Of the IEM plugins, if it is indeed a seventh order plugin, although I did not give me the time to read well and seek to support changing it to a first order [4 channels], or I still thought about trying it with some plugin Rack VST that handles the issue of internal management of the channels and with some matrix i/or from the 8 channels to the 64. that for why nothing is lost, as it is, we will see with time ambiophonic plugins of the first order and its 4 Channels
I will be giving me a time space this weekend to try the new version that you put with those problematic plugins
That said, yes, I hoped that Youlean was one of the plugins that will work at the first, since I have also used it in the Winamp Vsthost plugin with AIMP 5.11, but for that there are the tests to gradually polish the Host capacity.
Of the IEM plugins, if it is indeed a seventh order plugin, although I did not give me the time to read well and seek to support changing it to a first order [4 channels], or I still thought about trying it with some plugin Rack VST that handles the issue of internal management of the channels and with some matrix i/or from the 8 channels to the 64. that for why nothing is lost, as it is, we will see with time ambiophonic plugins of the first order and its 4 Channels
I will be giving me a time space this weekend to try the new version that you put with those problematic plugins
8
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 27, 2023, 04:42:09 »
[ quote author=Artem link=topic=32820.msg438120#msg438120 date=1696598941]
Please try this build[/ quote]
Continuing with the tests in AIMP 5.3.0.2524 RC of 32bit and 64bit
Houston, we have a problem!
We will start with the problematic VST plugins.
These plugins; And itself, all those that are of the same type, present the same symptoms of having a reproduction to jumps, without having a fluid measure of audio levels and interfering with reproduction. And although they are only dedicated to the issue of taking Lops Sound levels, there are plugins that use this same calculation system for the audio process they are going to perform. This situation is the same both in the 32bit and 64bit version of AIMP 5.3 RC
- Youlean Loudness put x86/x64
- dpMeterXT x86/x64, this one even restarts AIMP and disappears from the DSP/VST tab
Hybrid Bus Compressor. This plugin is the same creator of Unlimited; Sonic Anomaly, is a multichannel compressor 5.1/2.0 [HB5 and HB2] in x86 and x64. The situations is that AIMP is completely freezing from the moment it is loaded on the DSP/VST tab. The funny thing is that it has an engine similar to that of the Unlimited plugin, which already works perfectly in the VSThost of AIMP 5.3 RC. This plugin has long used it on AIMP 4.5/5.11 with the complement of Winamp_vsthost and works correctly.
From the same sonic anomaly developer, VOLA2 also gives problems
Multiband compressor presented an error message
This lack of check, but it is a plugin for Ambiosonic, and I still have to review it more calmly to know if AIMP can be used directly for ambiosonic sound or I have to use another previous complement.
Please try this build[/ quote]
Continuing with the tests in AIMP 5.3.0.2524 RC of 32bit and 64bit
Houston, we have a problem!
We will start with the problematic VST plugins.
These plugins; And itself, all those that are of the same type, present the same symptoms of having a reproduction to jumps, without having a fluid measure of audio levels and interfering with reproduction. And although they are only dedicated to the issue of taking Lops Sound levels, there are plugins that use this same calculation system for the audio process they are going to perform. This situation is the same both in the 32bit and 64bit version of AIMP 5.3 RC
- Youlean Loudness put x86/x64
- dpMeterXT x86/x64, this one even restarts AIMP and disappears from the DSP/VST tab
Hybrid Bus Compressor. This plugin is the same creator of Unlimited; Sonic Anomaly, is a multichannel compressor 5.1/2.0 [HB5 and HB2] in x86 and x64. The situations is that AIMP is completely freezing from the moment it is loaded on the DSP/VST tab. The funny thing is that it has an engine similar to that of the Unlimited plugin, which already works perfectly in the VSThost of AIMP 5.3 RC. This plugin has long used it on AIMP 4.5/5.11 with the complement of Winamp_vsthost and works correctly.
From the same sonic anomaly developer, VOLA2 also gives problems
Multiband compressor presented an error message
This lack of check, but it is a plugin for Ambiosonic, and I still have to review it more calmly to know if AIMP can be used directly for ambiosonic sound or I have to use another previous complement.
9
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 08, 2023, 05:38:18 »
Calmly, time to time. 
Surely he wants to purify the stability of Host VST and when he finished doing so, he will take out a new beta x86 and x64 with the stable code.
It is now checking about the problems you comment with Youulean Loudness Meter to put and want to solve them before putting those changes in a new compilation of the Beta x64 version
That will be easier than to be compiling the same changes in both version x86 and x64 for each correction that is coming out
Surely he wants to purify the stability of Host VST and when he finished doing so, he will take out a new beta x86 and x64 with the stable code.
It is now checking about the problems you comment with Youulean Loudness Meter to put and want to solve them before putting those changes in a new compilation of the Beta x64 version
That will be easier than to be compiling the same changes in both version x86 and x64 for each correction that is coming out
10
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 07, 2023, 00:40:05 »
Thank you very much for taking the time to add the Host VST, which opens a whole world of possibilities
Excellent! Now if you charge a limited as I show in this capture
And work well Unlimited VST
¡Unlimited Works!
This plugin already gave some problems and in this Beta 2521 version that you released something better, but Youlean Loudness Meter works for a while, but then gives this error
https://youlean.co/download-youlean-loudness-meter
As I said, with Voxengo filters it works very well, here we have two, span and transgainer
But when using youlean Loudness Meter 2.4.3 together with Voxengo [or any other vst] it blocks and gives this error
Others who work well are Fabfilter filters, at least the pro-c2 compressor and with other filters working.
All were tested with the DS, ASIO and WASAPI outings and the results are the same in each case. The captures were made with ASIO
This was with WASAPI
Please try this build: https://www.aimp.ru/files/windows/builds/aimp_nightly_w32.exeThank you very very much
Excellent! Now if you charge a limited as I show in this capture
And work well Unlimited VST
¡Unlimited Works!
This plugin already gave some problems and in this Beta 2521 version that you released something better, but Youlean Loudness Meter works for a while, but then gives this error
https://youlean.co/download-youlean-loudness-meter
As I said, with Voxengo filters it works very well, here we have two, span and transgainer
But when using youlean Loudness Meter 2.4.3 together with Voxengo [or any other vst] it blocks and gives this error
Others who work well are Fabfilter filters, at least the pro-c2 compressor and with other filters working.
All were tested with the DS, ASIO and WASAPI outings and the results are the same in each case. The captures were made with ASIO
This was with WASAPI
11
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 06, 2023, 03:31:54 »
Continuing with the tests [I had screenshots but I don't find them anymore]
These vst plugins work well in AIMP x86, but their x64 versions does not work on AIMP x64, the plugin window opens but the white window stays, there is no crash but neither can you close that plugin window
GComp, Gcomp2 and Gmulti [x86 and x64]
This Plugin Thimeo Stereo Tool works on its x86 version, but its x64 version makes Crash
Download x86/x64 Thimeo Stereo Tool 9.9
https://ufile.io/adhnsyf4
But Voxengo plugins if they work well both in their x86 [at AIMP x86] versions and in their x64 versions [in AIMP x64]
It seems that Bluecat's plugins also work well both in x86 and x64
These vst plugins work well in AIMP x86, but their x64 versions does not work on AIMP x64, the plugin window opens but the white window stays, there is no crash but neither can you close that plugin window
GComp, Gcomp2 and Gmulti [x86 and x64]
This Plugin Thimeo Stereo Tool works on its x86 version, but its x64 version makes Crash
Download x86/x64 Thimeo Stereo Tool 9.9
https://ufile.io/adhnsyf4
But Voxengo plugins if they work well both in their x86 [at AIMP x86] versions and in their x64 versions [in AIMP x64]
It seems that Bluecat's plugins also work well both in x86 and x64
13
Звуковые эффекты / Sound Effects / Re: VST host DSP
« on: October 05, 2023, 00:21:08 »
Thanks for Host VST... ¡Marvelous!
Aimp 5.30 x64 beta, it is the only 64bit vst that I have
VST Unlimited x64 crash [also in AIMP x86 crash unlimited x86]
Aimp 5.30 x86 beta.
Many plugins that I have tried work well
Even Bluecat's Patchwork 2.5
Aimp 5.30 x64 beta, it is the only 64bit vst that I have
VST Unlimited x64 crash [also in AIMP x86 crash unlimited x86]
Aimp 5.30 x86 beta.
Many plugins that I have tried work well
Even Bluecat's Patchwork 2.5
Pages: [1]