AIMP Forum

AIMP for Windows => Предложения / Suggestions => Topic started by: jlmcr87 on October 22, 2015, 18:11:31

Title: Make aimp3/4 dpi aware
Post by: jlmcr87 on October 22, 2015, 18:11:31
I´m using windows 10 at 1920x1080. To see the things bigger i set the configuration to 125%. With that aimp3 is displayed a little blurry. Can you make it dpi aware? Thanks
Title: Re: Make aimp3/4 dpi aware
Post by: bezzvuka on October 23, 2015, 06:31:30
Temporary Solution: http://ccm.net/faq/32589-windows-8-1-disable-display-scaling-on-high-dpi-settings
Title: Re: Make aimp3/4 dpi aware
Post by: jlmcr87 on October 24, 2015, 14:25:28
Yes i´m using that since windows 10 launch. But the problem is that aimp3 looks too small. So are you going to make aimp dpi aware in a future release? Thanks
Title: Re: Make aimp3/4 dpi aware
Post by: jlmcr87 on February 24, 2016, 22:21:55
Aimp4, 2016, and still no hi-dpi interface(most of the programs have it). Looks blurry on windows 10  with high resolution monitors.
Title: Re: Make aimp3/4 dpi aware
Post by: Artem on February 24, 2016, 23:47:58
Aimp4, 2016, and still no hi-dpi interface(most of the programs have it). Looks blurry on windows 10  with high resolution monitors.

I am not sure about "most". A lot of apps that I using has no hidpi support.
Of course, I have planned this feature to this year, but I don't know for now what I must do with skins.
Title: Re: Make aimp3/4 dpi aware
Post by: jlmcr87 on March 01, 2016, 10:26:29
Hello Artem, I think you can do this:

-Adapt AIMP4 and the default skin to High dpi.

-Create a setting that forces the old dpi mode to be compatible with all the skins.

Thanks for your response and for your program, i use it all days to play flac files.
Title: Re: Make aimp3/4 dpi aware
Post by: Artem on March 01, 2016, 10:46:19
-Adapt AIMP4 and the default skin to High dpi

Vector-based skins only can support for dpi changing. But AIMP skins is imabe-based. I afraid, I must create the different skins for each dpi.
Title: Re: Make aimp3/4 dpi aware
Post by: EvilDragon on May 05, 2016, 21:14:48
Or, skins can use oversized graphics (200% of the size), and then images are scaled DOWN depending on DPI, which will look better than scaling UP (which ends up being very blurry no matter which resize algorithm you use).
Title: Re: Make aimp3/4 dpi aware
Post by: jlmcr87 on May 09, 2016, 09:07:26
Any news Artem? Thanks for your work :)
Title: Re: Make aimp3/4 dpi aware
Post by: Artem on May 09, 2016, 09:52:33
Any news Artem? Thanks for your work :)

No, I have few ideas, but I have not check it yet
Title: Re: Make aimp3/4 dpi aware
Post by: jlmcr87 on July 31, 2016, 18:55:00
No, I have few ideas, but I have not check it yet

Please add the high DPI on AIMP 4 v4.10.
Title: Re: Make aimp3/4 dpi aware
Post by: Artem on July 31, 2016, 21:52:50
Please add the high DPI on AIMP 4 v4.10.

No, release of v4.10 will be soon. High DPI is too complex task for implementation in minor version, but I already working on it.
Title: Re: Make aimp3/4 dpi aware
Post by: hellonearthis on September 01, 2016, 04:33:59
I hope this can be added soon,  turning off DPI for Aimp is hard to read on 4K monitor.

One quick fix could be to have a settings option to double size everything,  that way dpi could be off but users will still get large readable size.

Would also fix the problem with docking Aimp, where the pointer and open aimp arrow don't line up.

links to help with DPI,  but I guess you have been there.
https://msdn.microsoft.com/en-us/library/windows/desktop/dd464646(v=vs.85).aspx
http://www.hanselman.com/blog/LivingAHighDPIDesktopLifestyleCanBePainful.aspx

Title: Re: Make aimp3/4 dpi aware
Post by: dreit on December 20, 2016, 18:39:14
(http://i.imgur.com/yuC54Bq.png)
At high DPI moves the point of interaction. The image shows where the cursor is and where he is working.
---
При высоком DPI смещается точка взаимодействия. На изображении видно где курсор и где он воздействует.
Интерфейс может становится либо уменьшенным и четким, либо большим и размытым. Данный баг проявляется именно в первом случае.
Проблема даже не в том, как выглядит интерфейс, а в том, что с ним сложно взаимодействовать из-за этого смещения.
win 8.1, монитор dell p2416d
Title: Re: Make aimp3/4 dpi aware
Post by: Artem on December 20, 2016, 20:19:17
Версия программы? Как вы добились того, что интерфейс остался четким и мелким?
Title: Re: Make aimp3/4 dpi aware
Post by: Алексей Долматов on December 20, 2016, 20:33:58
То что масштаб не меняется это стандартная функция ОС, скорее всего сделано именно так.
Но эта функция у меня работает не полностью  ???
Но у меня нет сдвига курсора на 7-ке. Либо это глюк на определённой ОС или масштаб меняли иначе.
Title: Re: Make aimp3/4 dpi aware
Post by: dreit on December 21, 2016, 08:19:42
Если честно, то я не знаю от чего это зависит. Просто время от времени разворачиваешь aimp, а он четкий и мелкий. Думаю, это проделки win 8.1. Замечу, что я никаких настроек для масштабирования не применял ни в программе, ни в винде. Поставил монитор, запустил винду и через какое-то время этот баг проявляется. В других программах такое пока не замечал.
Свойства aimp.exe: http://i.imgur.com/6EePzDI.png
Настройки в винде: http://i.imgur.com/9oxb5QF.png (Это те, которые нужны?)
Версия aimp 4.11, build 1841 (09.10.2016).
Title: Re: Make aimp3/4 dpi aware
Post by: Алексей Долматов on December 21, 2016, 21:51:31
Сам 8-кой не пользовался (7 и 10 использовал), но с виду то
Title: Re: Make aimp3/4 dpi aware
Post by: jlmcr87 on April 05, 2017, 18:52:45
Artem, this are the latest news with High DPI scaling in Windows 10 Creators Update:

https://blogs.windows.com/buildingapps/2017/04/04/high-dpi-scaling-improvements-desktop-applications-windows-10-creators-update/#rxeGXlmbL7JRQDcc.97

Maybe this can help you to adapt Aimp4. Please don´t leave this for longer time.Thanks
Title: Re: Make aimp3/4 dpi aware
Post by: Artem on April 05, 2017, 19:04:03
Thank you for the information. Looks like these new features will slow down the implementation of this feature, because, now I should implement new mode support too. Amazing...
Title: Re: Make aimp3/4 dpi aware
Post by: jlmcr87 on April 06, 2017, 11:08:37
Thank you for the information. Looks like these new features will slow down the implementation of this feature, because, now I should implement new mode support too. Amazing...
The same problem as before and if you manually apply the compatibility mode, aimp4 appears very small in the screen.
Title: Re: Make aimp3/4 dpi aware
Post by: 4mat on August 20, 2017, 14:19:42
The old Winamp had a very simple menu option that allowed doubling the whole interface (UI and fonts). Would it be difficult to implement something like that? I'm trying to run AIMP under linux (using wine) and everything works fine, but because of the HiDPI screen, AIMP's UI is very small, and song titles are difficult to read.
Title: Re: Make aimp3/4 dpi aware
Post by: Artem on August 20, 2017, 18:28:21
1) We have published v4.50 Beta that already adapted for high-dpi systems
2) Yes, we will implement an ability to specify target DPI manually in Beta 2.
Title: Re: Make aimp3/4 dpi aware
Post by: 4mat on August 21, 2017, 16:07:59
Just tried v4.50 and I can confirm it scales correctly on my hidpi display & under wine. Thanks!
Title: Re: Make aimp3/4 dpi aware
Post by: sprayer on May 03, 2019, 11:42:21
Можете подсказать почему эта настройка не активна для плеера?
https://i.imgur.com/5MgHcU5.jpg
в системе  стоит масштабивароние так как 4к монитор, в других приложениях опции активны они отключают масштабирование в приложениях где можно настроить масштаб интерфейса и системное масштабирование не нужно.
Эта опция насколько я знаю  появилась в последних билдах вин10
Title: Re: Make aimp3/4 dpi aware
Post by: Soolo on May 03, 2019, 11:53:18
Можете подсказать почему эта настройка не активна для плеера?
Масштабирование настраивается в самом АИМП
Настройки \ Интерфейс
Title: Re: Make aimp3/4 dpi aware
Post by: sprayer on May 03, 2019, 11:56:19
Масштабирование настраивается в самом АИМП
Настройки \ Интерфейс
Спасибо, поменял с авто на 100%